TORNADOR® Cleaning Tools are the fastest and easiest way to clean and dry all automotive surfaces. The TORNADOR® works with your air compressor to blast cleaning solution into crevices you can’t reach by hand. Clean carpet, plastics, and upholstery inside the car. Clean wheels, convertible tops, and body seams on the exterior. The TORNADOR® cleans where other tools can’t!
The patented TORNADOR® Cleaning Tool tackles your most challenging detailing jobs with ease. The cone-shaped nozzle and oscillating tip create a tornado cleaning action that cleans hard and soft surfaces like nothing you’ve seen before. Dirt and grime are immediately released from fabrics, carpet, and solid surfaces.
The TORNADOR® Cleaning Tool releases a fine mist of cleaning solution that does not over saturate surfaces. You’ll see the liquid turning dirty as grime is released from the surface. Wipe with a microfiber towel. Then turn the dial to shut off the water and use the compressed air to dry the cleaned area. It’s that simple.
Use the TORNADOR® Cleaning Tool on the dashboard, door panels, steering wheel, fabric upholstery, carpet, floor mats, and between seats. The TORNADOR® cleans in tough-to-reach places between seats and in seams. Because it releases so little liquid, surfaces dry quickly.
On the exterior, use the TORNADOR® Cleaning Tool to clean fabric convertible tops, body seams, wheels, and emblems. There’s no need to scrub. The TORNADOR® does the hard work for you.
The TORNADOR® Cleaning Tool must be used with an air compressor capable of producing a constant air pressure of at least 60 psi. Do not to exceed 110 psi in order to protect your TORNADOR® from unnecessary wear. Use the green valve to control the amount of liquid released by the TORNADOR®.
To clean any surface, dilute the desired cleaner according to label’s directions. Turn the liquid valve straight up and use an overlapping motion as you pass the TORNADOR® Cleaning Tool over the surface. If necessary, allow the cleaning liquid to dwell for 10-15 seconds. Use a microfiber towel to absorb excess liquid. Then turn the liquid valve off and use the compressed air to dry the cleaned area.
Cleaning with the TORNADOR® Cleaning Tool is easier and faster than small detailing brushes or swabs. Just spray and watch the dirt release from plastics, rubber, vinyl, and fabrics.
For optimal performance, the TORNADOR® Cleaning Tool works best with an air compressor that produces 5 CFM, or at least 85 psi.
The TORNADOR® Cleaning Tool includes the gun with the 32 oz. jar and an extra cap for the jar.